It is recommended to use a round steel post with a minimum diameter of 90mm or a 90x90mm square steel post. The minimum thickness of the post wall should be 3.5mm.
Table Of Contents
Can you use 4×4 posts for a shade sail?
If your posts are not supported with diagonal bracing, you will want 6x6s. 4x4s will bounce a lot at that height. It is recommended to use a round steel post with a minimum diameter of 90mm or a 90x90mm square steel post. The minimum thickness of the post wall should be 3.5mm. A properly mounted and tensioned shade sail will have 100 to 200 pounds of tension on it. Is it possible to attach a sail shade to a fence?.
We’ve seen sail shades attached to both metal and wood fences, but only to the posts. You will want to reinforce the fence post with concrete because the sail shade can create supplementary force. A 4 inch depth of gravel is laid at the base of the post. The lag bolts are partially driven into the post to hold it in place. Use string lines to make sure they are plumb. The posts should be braced until the concrete has set.
What size post should I use for shade sail?
It is recommended to use a round steel post with a minimum diameter of 90mm or a 90x90mm square steel post. The minimum thickness of the post wall should be 3.5mm.
How strong do shade sail posts need to be?
A properly mounted and tensioned shade sail will have 100 to 200 pounds of tension on it.
Can you attach a shade sail to a fence post?
Is it possible to attach a sail shade to a fence?. We’ve seen sail shades attached to both metal and wood fences, but only to the posts. You will want to reinforce the fence post with concrete because the sail shade can create supplementary force.
How do you attach shade sails to wood posts?
A 4 inch depth of gravel is laid at the base of the post. The lag bolts are partially driven into the post to hold it in place. Use string lines to make sure they are plumb. The posts should be braced until the concrete has set.
How do you anchor shade sail posts?
Installation guide for sail shade….
- Call the utility companies.
- Measure and mark the location of the brackets. .
- Attach mounting brackets to your home to make sure they are straight. .
- If necessary, dig holes.
- Attach the eyes and brackets to the external supports. .
- The shade should be clipped to the brackets.
That’s it!
How do you install shade sails posts?
How deep do posts need to be for a shade sail?
The height of the sail and the depth of your footings should be taken into account. Minimum depth is 36 inches deep and 30 inches square. If your post height is over 8 feet, we recommend a hole depth of 40% above ground. A 4 inch depth of gravel is laid at the base of the post. The lag bolts are partially driven into the post to hold it in place. Use string lines to make sure they are plumb. The posts should be braced until the concrete has set. One of the best ways to mount a shade sail is to have high points opposite each other. This creates an architectural mess. It’s ideal to set a slope of 15 degrees. The rise to run ratio is created by this slope.
How do you install shade sails with posts?
A 4 inch depth of gravel is laid at the base of the post. The lag bolts are partially driven into the post to hold it in place. Use string lines to make sure they are plumb. The posts should be braced until the concrete has set.
How much slope should a shade sail have?
One of the best ways to mount a shade sail is to have high points opposite each other. This creates an architectural mess. It’s ideal to set a slope of 15 degrees. The rise to run ratio is created by this slope.
What hardware do I need for a shade sail?
Hardware choices include turnbuckles, spring hooks, thimbles, heavy-duty dee rings, shackles, mounting plates, wire rope, triangle rings, washers, rope clamps, brackets, and eye nuts and bolts.
